【摘 要】
:
A simplex particle swarm optimization (simplex-PSO) derived from the Nelder-Mead simplex method was proposed to optimize the high dimensionality functions. In s
【基金项目】
:
the National Natural Science Foundation of China Project;教育部高等学校博士学科点专项科研基金
论文部分内容阅读
A simplex particle swarm optimization (simplex-PSO) derived from the Nelder-Mead simplex method was proposed to optimize the high dimensionality functions. In simplex-PSO, the velocity term was abandoned and its reference objectives were the best particle and the centroid of all particles except the best particle. The convergence theorems of linear time-varying discrete system proved that simplex-PSO is of consistent asymptotic convergence. In order to reduce the probability of trapping into a local optimal value, an extremum mutation was introduced into simplex-PSO and simplex-PSO-t (simplex-PSO with turbulence) was devised. Several experiments were carried out to verify the validity of simplex-PSO and simplex-PSO-t, and the experimental results confirmed the conclusions: (1) simplex-PSO-t can optimize high-dimension functions with 200-dimensionality; (2) compared PSO with chaos PSO (CPSO), the best optimum index increases by a factor of 1×10~2-1×10~4.
其他文献
Zr_(58.5)Ti_(14.3)Nb_(5.2)Cu_(6.1)Ni_(4.9)Be_(11.0) bulk metallic glass matrix composites, containing β-Zr dendrites, were fabricated by Bridgman solidificatio
Superfine cerium-zinc oxides Ce_(1-x)Zn_xO_(2-x) with x = 0, 0.1, 0.3, 0.5, and 1.0 were obtained by grinding Ce(SO_4)_2·4H_2O,ZnSO_4·7H_2O and NH_4HCO_3 unde
Aluminum coatings on Mg alloy AZ31 were fabricated using the thermal spraying technique, and then sealed with silane. The surface morphology and chemical groups
The hot compression tests of Super304H austenitic heat resistant steel were carried out at 800-1200℃ and 0.005-5 s~(-1) using a Gleeble 3500 thermal-mechanical
The adsorption of Ca( Ⅱ) ions from aqueous solution by chitosan a-ketoglutaric acid (KCTS) and hydroxamated chitosan a-ketoglutaric acid (HKCTS) was studied in
The influences of 2.5wt% Mn addition on the microstructure and mechanical properties of the Cu-11.9wt%Al-3.8wt%Ni shape memory alloy (SMA) were studied by means
Fe-based amorphous alloys with high inm content of 76at%-80at% were synthesized in the Fe-Mo-Si-P-C-B alloy system by the single roller melt-spinning technique.
The mixture of factor analyzers (MFA) can accurately describe high resolution range profile (HRRP) statistical characteristics.But how to determine the proper n
The dynamic modeling and solution of the 3-(R)RS spatial parallel manipulators with flexible links were investigated. Firstly, a new model of spatial flexible b
The effect of F, K, and Na on the solid phase reaction of the Baiyunebo iron ore was investigated by differential thermal analysis (DTA) and X-ray diffraction (