论文部分内容阅读
介绍一种对发动机((?)—204和(?)—206发动机)进行防腐蚀处理的简易方法。把已脱水的机油是用汽车轮胎打气筒(见图)通过气缸套的进气孔喷入气缸。在气筒的软管上接一直径6毫米的金属管,管头焊有喷油嘴2。转动发动机的曲轴顺次将活塞移至最低位置。然后,通过进气孔伸入喷油管,喷嘴的喷油孔向上,并用气筒往气缸内喷入50厘米~3脱水的机油。为了确定喷油量,在气筒的杆上做有记号。利用
A simple method of anticorrosion treatment of engine ((?) - 204 and (?) - 206 engines) is described. The dewatered oil is injected into the cylinder through the air intake of the cylinder liner using a car tire pump (see photo). A 6 mm diameter metal tube is attached to the hose of the cylinder, and the nozzle 2 is welded to the tube head. Turn the crankshaft of the engine to move the piston to its lowest position in sequence. Then, through the intake hole into the injection tube, nozzle nozzle up, and the cylinder into the cylinder into the 50 cm ~ 3 dehydrated oil. To determine the amount of fuel injection, make a mark on the cylinder rod. use