对８０Ｔ冲床采取了减振和改模综合降噪治理。减振采用ＷＪ－８５和ＷＪ－９０型橡胶固定在压力机与基础之间，降噪是将平行模改为斜刃模。采用减振和斜刃模具后，平均减振效果８２９％，冲床空转噪声声级降低了２８ｄＢ（Ａ），冲剪噪声声级降低了３６ｄＢ（Ａ）。 Tension on the 80T took a comprehensive model noise reduction and management. Vibration damping using WJ-85 and WJ-90 rubber fixed between the press and the foundation, the noise reduction is parallel to the oblique mode change module. The average vibration damping effect of 82.9% was achieved with vibration-damping and bevel-edge dies, the noise level of idling noise reduced by 28dB (A), and the punching noise level was reduced by 36dB (A).