论文部分内容阅读
Dynamic Elastic Modulus of Cement Paste at Early Age based on Nondestructive Test and Multiscale Pre
【机 构】
：
College of Civil and Transportion Engineering, Hohai University, Nanjing, 210098, China;China Three
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2014年2期
其他文献
In order to investigate the damage characteristic of ceramic-metal interpenetrating phase composite (IPC) under dynamic loading, uniaxial dynamic compression was performed to characterize the failure of SiC/Al composite with 15%porosity using a modified S
In order to further understand the wear mechanisms of cemented carbide cutter head of conical pick, six wornout cutter heads were investigated detailedly through scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). Abrasion wear an
Electrochemical Hydrogen Storage Performances of the Si Added La-Mg-Ni-based A2B7-type Electrode All
Crystallization Kinetics and Magnetic Properties of Fe73.5Si13.5B9Cu1Nb1V2 Nanocrystalline Powder Co
Interfacial Microstructure and Mechanical Properties of Al/Mg Butt Joints Made by MIG Welding Proces
Butt joints between Mg alloy AZ31B and pure Al 1 060 sheets were produced via metal inert gas welding process with Zn-Cd alloy foil. Crack-free Al/Mg butt joints between AZ31B Mg alloy and pure Al 1060 sheets were obtained. Intermetallic compound layer 1
Evolution of Joint Formation in Resistance Microwelding of Crossed Pt-10%Ir and 316 LVM Stainless St
The surface morphology, cross-sections, and joint break force (JBF) of joints welded under different electrode forces were studied. The defects, such as electrode sticking, notch, and excessive expulsions, were observed in the joints. No desirable joints