利用摩擦压力机从事锻造生产,在我厂已有多年历史。图1所示锻件,是我们在6175kN摩擦压力机上进行锻造生产的。由于我厂锻件种类较多,我们采用了通用模架,其结构如图2所示。经多年生产实践证明,该模架结构简单,通用性强,具有使用方便,拆装迅速,锻造范围广等优点。 1.模具结构通用模架如图2所示,它分别由上、下模座组成。上模座是由上模板2,上模楔3,和上模套4等部分组成。上模座是由螺栓紧 The use of friction presses engaged in forging production, in our plant has many years of history. The forgings shown in Figure 1 were forged on a 6175kN friction press. As I plant a larger number of forgings, we use a common mold base, the structure shown in Figure 2. After years of production practice has proved that the mold structure is simple, versatile, with easy to use, disassembly quickly, forging a wide range of advantages. 1. Mold Structure Universal mold base shown in Figure 2, which consists of upper and lower mold base. The die holder is composed of the upper die plate 2, the upper die wedge 3, and the upper die sleeve 4. The die holder is bolted