论文部分内容阅读
在Neophot显微镜照相附件上附加一个接筒,可使拍摄范围从4.2倍到1/6.75倍,不仅能拍微型物件,也能拍摄宏观低倍组织。图1中数据系实测所得,筒内齿纹目的在于减少反光,如不车制问题也不大。接筒车制后全部用铵基无光黑漆喷涂。按装:拆下快门,松开固定器A、B,把照相附件一起取下,然后将附件转一个向,使毛玻璃面接近显微镜镜身,先装入固定器A,再装固定器B。将照相镜头从对光圈套上旋下装于接筒上旋紧,将接筒装到快门架上旋紧,最后将快门装到接筒上旋紧。
Attaching a barrel to the Neophot microscope attachment allows the shooting range from 4.2x to 1x / 6.75x to capture not only micro objects but also macro low magnification. The data in Fig. 1 is the measured data. The purpose of the tube tooth profile is to reduce the reflection. If the problem is not the vehicle system, the problem is not large. After all the car system with aluminum-based matt black paint spraying. Pressing: remove the shutter, loosen holder A, B, the camera accessories removed together, and then turn the attachment to a direction so that the frosted glass surface close to the microscope, the first holder A, then install the fixture B. Rotate the photographic lens from the aperture ring onto the barrel, tighten the barrel to the shutter frame, and then tighten the shutter onto the barrel.