【摘 要】
：
In this paper, the positive influence of apodization weighting method on frequency characteristics of surface acoustic wave (SAW) temperature sensor is investigated. Simulation and experiment results show that side lobe suppression abilities of the sensor
【机 构】
：
TianjinKeyLaboratoryofFilmElectronic
【出 处】
：
OptoelectronicsLetters
论文部分内容阅读
In this paper, the positive influence of apodization weighting method on frequency characteristics of surface acoustic wave (SAW) temperature sensor is investigated. Simulation and experiment results show that side lobe suppression abilities of the sensor can be improved by using apodization weighting which is based on Chebyshev window. Meanwhile, we find that the side lobe of the sensor can be further restrained, when the dummy electrodes are removed. Frequency- temperature characteristics of the devices are independent of the inclusion of dummy electrodes. The apodization weighted SAW temperature sensor shows great application potential in occasions with strong electromagnetic interference.
其他文献
星间高码率光通信系统中由于无法进行光学中继放大,需要高码率、高通信灵敏度的光学接收机。分析了采用掺铒光纤放大器(EDFA)作为光学预放的高灵敏度零差相干接收机方案,并搭建了零差相干通信系统,测试了系统在通信速率为8~10 Gbit/s下的二进制相移键控(BPSK)通信性能。实验表明,此系统在无编码误码率要求为10 -3时,10 Gbit/s BPSK通信信号接收灵敏度约为-48 dBm,距离量子噪声极限仅7 dB,优于已发表的10 Gbit/s零差相干通信系统测试结果。
利用全量子理论, 研究了多光子跃迁过程高斯型耦合Tavis-Cummings模型中场与原子的纠缠特性。讨论了多光子原子运动速度、光场初态的平均光子数及跃迁光子数对场与原子之间纠缠特性的影响。结果表明：原子运动速度的变化改变了场熵演化曲线的振荡时域; 光场初态影响场熵演化曲线的周期性; 跃迁光子数的增加使场熵演化曲线的振荡频率和场与原子之间的平均纠缠度变大。
We investigate the effects of a piece of zero-dispersion fiber (ZDF) on the pulse dynamics of a passively mode-locked fiber laser operating in the stretched-pulse regime. Numerical simulation suggests that the proper location and length of ZDF facilitate
采用延迟器与旋光器的串联模型, 研究磁场中双折射光纤的偏振传输特性, 将它们的琼斯矩阵按照两种不同的顺序级联相乘, 导出了两种等效模型中等效相位延迟量、等效快轴方向和等效旋光角的解析表达式。研究发现, 当光纤同时具有线双折射和圆双折射时, 单位长度的等效相位延迟量并不等于其固有的线双折射, 等效旋光角也不等于其法拉第旋转角, 它们同时都与光纤的固有线双折射和磁场引起的圆双折射相关联。且在不同级联顺序的两种等效模型中, 等效相位延迟器的快轴方向都不与光纤的双折射主轴重合, 而是分别向两个相反的方向偏移一定的
We fabricate low threshold current monolithic distributed feedback (DFB) laser with a multi-mode interface (MMI) combiner using butt-joint metal-organic chemical vapor deposition technology with different waveguide structures. Multi-layer mask self-aligne
Laser skin perforation is an effective and promising technique for use in blood collection. In this study, the relation between the perforation profile of skin and laser irradiation at various energies is discussed. Increasing laser energy does not unifor
In this study, a quaternary blending strategy was applied in the fabrication of organic photovoltaic devices and large-area modules. As a result, the ultimate quaternary organic solar cells (OSCs) deliver 16.71% efficiency for small-area devices and 13.25
为了研究激光技术焊接块体非晶合金的可行性,采用激光焊接块体非晶合金Zr45Cu48Al7。当焊接速度为8m/min、激光输出功率为1.2kW时,焊缝和热影响区均保持了非晶特性,且没有发现裂纹等的缺陷;试样的热循环温度曲线分析表明,焊缝和热影响区急速从熔点冷却到430℃以下是该试样保持非晶的原因。结果表明,采用激光焊接技术可以成功连接块体非晶合金。
简要介绍了实验室中使用的三种透射光栅的结构。在北京同步辐射源上实验标定了这些光栅的相对衍射效率。借助于光栅模型，得到了光栅的重要结构参数，并对光栅的绝对衍射效率进行了模拟计算和讨论。