【摘 要】
：
The fracture behavior of fully lamellar binary γ-TiAl alloys is extremely anisotropic with respect to the lamellar orientation.For the fully lamellar Ti-46Al-0
【机 构】
：
School of Materials Science and Engineering,College of Electromechanical Engineering
论文部分内容阅读
The fracture behavior of fully lamellar binary γ-TiAl alloys is extremely anisotropic with respect to the lamellar orientation.For the fully lamellar Ti-46Al-0.5W-0.5Si alloy,the existence of silicide clusters plays a critical role on the fracture behavior.In the present study,tensile test and three point bending test were performed at room temperature with the loading axis parallel and perpendicular to the lamellar orientation,respectively.To investigate the influence of silicide clusters on the initiation and propagation of cracks,the fracture surface and the cracks adjacent to the fracture zone of the specimens have been analyzed.Results show that the fracture process is related to the morphology and distribution of the silicide clusters.Crack preferentially initiates at and propagates along the interface of silicide and α2/γ lamellar with the loading axis perpendicular to the length direction of silicide.While the silicide can prevent the propagation of cracks from running across with the crack growth direction perpendicular to the length direction of silicide.
其他文献
Due to the heterogeneity and versatility of emerging services and applications in wireless networks,it has been a great challenge to improve the system performa
With the rapid development of engineering component with integration,high-speed and multi-parameter,traditional techniques havent met practical needs in extreme
To study the mechanical properties of the film/substrate structure,the finite element code ABAQUS v6.9-1is adopted to simulate the tensile mechanical behavior o
Ti-Ni-Mo-Si composite coating was fabricated on mild steel by reactive braze coating process with Ti61.9Ni24.6Si4.4Mo9.1 ( wt.％ ) powders as the raw materials.Mi
Shear probe works under a tough environment where the turbulence signals to be measured are very weak.The measured turbulence signals often contain a large amou
Past researchers have anticipated the occurrence of a great earthquake in the central Himalayas in the near future.This may cause serious damage in the Kathmand
The influence of laser beam divergence angle on the positioning accuracy of scanning airborne light detection and ranging (LIDAR) is analyzed and simulated.Base
Titania thin films are prepared by electron beam evaporation and deposition conditions are optimized.X-ray diffraction studies have shown a polycrystalline natu
This article proposes an optimized in-band control channel scheme with channel selection scheduling algorithm and network coding based transmission paradigm in
Compared with traditional waveform digitization with flash-ADCs,waveform digitization with switchedcapacitor arrays (SCAs) is able to achieve the sampling speed