8.1 前言 固体润滑膜大都能耐10~8次以上的摩擦,也有超过10~8次寿命的。但当要求更长的耐久性时,则需采用某种方法向滑动部位不断地供给固体润滑剂。例如,把固体润滑剂预先压制成片置于滑动面上,或者在滑动面上钻孔並将固体润滑剂嵌入其中作为润滑源。此外,还可以使用含固体润滑剂的润滑油或润滑酯,也有把固体润滑剂载于气流中吹入的方法等。 8.1 Introduction Mostly solid lubricating film resistant to more than 10 to 8 times the friction, but also more than 10 to 8 life expectancy. However, when longer durability is required, there is a need to constantly apply solid lubricant to the sliding parts. For example, a solid lubricant is pre-pressed into a sheet on a sliding surface, or a hole is drilled in a sliding surface and a solid lubricant is embedded therein as a lubrication source. In addition, a lubricating oil or a lubricating grease containing a solid lubricant, a method of blowing a solid lubricant in a gas flow, or the like can also be used.