论文部分内容阅读
活塞销温挤压自动化是将中频加热设备和挤压机通过一套提升机、三套机械手,由气、液、电联合控制组成（见图1）。从七九年底投入试生产运行以来,经过不断完善,目前已挤压出35余万件X195活塞销。实践证明:结构较合理,动作较可靠,减轻了工人劳动强度,工作环境文明,基本上满足了活塞销温挤压工艺的要求。 一、活塞销温挤压工艺过程 的动作顺序 1、已浸涂的毛坯由提升机送到加热器的储料道上; 2、补料缸将毛坯按时间节拍一个一个地运到加热器的入口处; 3、推料缸按时间节拍顺序将坯料推入加热器中,坯料经连续加热后,顺序从加热器出口掉入下端装有活门的接料筒内; 4、送料缸将热坯料按节拍送往挤压机的喂料机械手; 5、喂料机械手抓住坯料由伸缩缸送到
Piston pin temperature extrusion automation is the IF heating equipment and extrusion machine through a set of hoist, three sets of manipulators, by the gas, liquid and electricity combined control (see Figure 1). From the end of 1979 into trial operation, since the continuous improvement, has extruded more than 350,000 pieces of X195 piston pin. Practice has proved that: the structure is more reasonable, more reliable action, reducing the labor intensity of workers, working environment and civilization, basically meet the piston pin extrusion process requirements. First, the piston pin extrusion process temperature sequence 1, has been dipping the blank by the hoist sent to the heater storage track; 2, feeding the rough chronology of the one by one shipped to the heater inlet ; 3, push the cylinder according to the time sequence of the beats into the heater, the billet after continuous heating, the order from the heater outlet into the lower end of the valve fitted with a barrel; 4, Beat sent to the extruder feeding robot; 5, feeding manipulator to grasp the blank by the telescopic cylinder to