【摘 要】
：
The difficulty of selecting appropriate rheological model and parameters for the alternating distribution of soft and hard rock layers was often encountered due to the unhomogeneity, discontinuity and anisotropy of rock mass. The Burgers and generalized K
【机 构】
：
School of Petroleum Engineering, China University of Petroleum, Beijing 102249, China;Yangtze River
论文部分内容阅读
The difficulty of selecting appropriate rheological model and parameters for the alternating distribution of soft and hard rock layers was often encountered due to the unhomogeneity, discontinuity and anisotropy of rock mass. The Burgers and generalized Kelvin models were applied to the soft and hard rock respectively and the rheological parameters were obtained based on the method of optimum separation. By using the simulated code FLAC3D, the stability of surrounding rocks of a certain underground plant was analyzed. The effect of surface load and weakening the parameters intensity of argillaceous and bioclastic interlayers between soft and hard rock on rheological behavior of layer composite rock mass was investigated. The results indicate that the rheological characteristics of soft and hard rock layer in composite rock mass can be described well with above two rheological models.
其他文献
The effect of geological uncertainty on the development and mining of underground coal deposits is a key issue for longwall mining, as the presence of faults generates substantial monetary losses. This paper develops a method for the conditional simulatio
Roadway surrounding rock is a compound structure consisted of roof, floor and sides. The sides of extraction opening is the weak coal mass, which affect immediately the stability of floor. It was simulated by numerical calculation for the strength of side
The trapezoidal cross-section roadway, driven along with its medium and fine grain sandstone roof in special thick stratum, was situated in shale strata. Rock-lining wall was employed in roadway, which its roof is in the free situation. Under the action o
The basic characteristics of the soft rock roadway under the dynamic pressure are analyzed. At the same time, the three fundamental approaches for controlling the surrounding rock are proposed, which are improving the surrounding rock strength, lowering t
Higher production, better safety standard, and potential for automation are some of the benefits of longwall mining. Today, longwall face advances at a faster rate exposing many diversified rock layers in a short period of time. It is now a serious challe
This paper presents a study on the criterion of crack initiation and propagation under creep conditions, which were investigated using specimens collected from outcropped sandstone rock formations. Beam specimens under three points bending were used in th
The target of the text is to scientifically appraise dynamic development of surface deformation in subsidence area and its influence on groundwork stability of natural pipe and then adopt some technological measures to ensure safe circulation of natural p
Being a safe and highly-efficient mining method, fully mechanized mining with sublevel caving (FMMSC) was extensively employed in Chinese coal mines with thick seam. In order to make drawing top-coal furthest to parallel work with shearer cutting coal,dec
Pit optimisation is the earliest and most established application of its kind in the minerals industry,but this has been primarily driven by metal,not coal.Coal has the same financiaI drivers for resource optimisation as does the metalliferous industry,ye
The paper was numerically focused on investigation of deformation, failure and instability of shear band-surrounding elastic rock system in plane strain direct shear test considering shear dilatancy according to fast lagrangian analysis of continua (FLAC)