论文部分内容阅读
本集油器是日本东洋技研株式会社的一个专利,其构造如图1。 (一)工作原理:集油器安装于一浮筒上,可随液面升降,始终使集油器顶部进口和油面保持—给定高度,通过螺旋桨连续不断地将油和水引入分离筒,油和水在分离室内根据比重差而进行二次分离,水从分离筒下部仍流回原池内,油积存于分离筒的上部,当油层积蓄到一定厚度后,通过油面探测器,自动开检油泵进行检油。
The oil collector is Japan’s Japan Institute of Technology Co., a patent, its structure shown in Figure 1. (A) How it works: Installed on a floater, the oil catcher can rise and fall with the liquid surface, always make the top of the oil collector and the oil surface to maintain - given a high degree of continuous introduction of oil and water into the separation cylinder through the propeller, Oil and water in the separation chamber according to the proportion of poor secondary separation, water from the lower part of the separation tube is still flowing back to the original pool, the oil accumulated in the upper part of the separation tube, when the reservoir accumulated to a certain thickness, through the oil surface detector, automatically open Inspection pump inspection oil.