胶类药材的生产,传统工艺过程为敞口常压熬制。需时长,质量不易掌握。消耗能源多,同时在长时间的熬制过程中,需要不断补充失去的水份,由此增加了胶类药材中无机盐的含量,直接影响胶类药材的质量。胶类药材主要成分为胶朊和钙盐等微量元素。胶朊溶于水,受热时间长,胶朊大部分被破坏或变性,造成胶质粘度降低,影响胶的凝结。用家用高压锅制取胶类药材,此方法变传统敞口常压煎煮提取为密闭加压煮提,压力在1kg/cm~2 The production of plastic medicines, the traditional process is open atmospheric pressure system. It takes time and quality is not easy to master. Consuming more energy, at the same time, in the long-term tanning process, it is necessary to continuously supplement the lost water, thereby increasing the content of inorganic salts in the plastic medicines and directly affecting the quality of the plastic medicines. The main ingredients of plastic medicines are trace elements such as capsules and calcium salts. The capsules are soluble in water, and the heating time is long. Most of the capsules are destroyed or degenerated, causing the gum viscosity to decrease and affecting the gelation. Using a household autoclave to prepare plastic medicines, this method changes the traditional open-end pressure boiling extraction to a closed pressurized cooking, the pressure is 1kg/cm~2