用计算法来确定曲柄机构所需的平衡重的尺寸和惯性矩时,当然应以往复和旋转质量的详细情况为依据。在单缸发动机中,通常、实际上仅平衡往复质量的0.5到0.6和全部回转质量。如把这些质量做成两块平衡重,则在每个曲柄上装上一块。在1953年7月发行的“大洋洲工程师”(Austrlasian Engineer)杂志上发表过 W.H.Schneider 的一篇题为《往复质量的平衡》(Balancing of Reciprocating Masses)的 Of course, the details of the reciprocating and rotating masses should of course be used when calculating the size and moment of inertia of the balance weight required by the crank mechanism. In single-cylinder engines, in practice, only 0.5 to 0.6 reciprocation masses and the total mass of revolution are generally balanced. If these qualities made of two balance weight, then install a piece on each crank. In an article by W. H. Schneider entitled “Balancing of Reciprocating Masses”, published in the July 1953 issue of Austrlasian Engineer,