论文部分内容阅读
Starting with Zr of two different purities, Ti-based bulk metallic glasses (BMGs) with a nominal composition of Ti40Zr25Cu12Ni3Be20 were prepared. The effect of the addition of yttrium at levels of 0.2 at.%, 0.4 at.%, 0.5 at.%, 0.6 at.%, and 1 at.% on the glass forming ability (GFA) of the alloy has been investigated by means of metallography, X-ray diffraction, and differential scanning calorimetry. Experimental data in-dicates that high impurity content dramatically reduces the glass forming ability. Microalloying with 0.5 at.% Y is effective in suppressing the crystalline phase formation and alleviating the detrimental effect of oxygen in the low-purity alloy. On the contrary, in the alloy contain-ing high-purity element, the effective yttrium addition is less than 0.4 at.%. The results indicate that the beneficial effect of the optimum dopants is mainly due to scavenging the oxygen impurity via the formation of innocuous phase.
The effect of the addition of yttrium at levels of 0.2 at.%, 0.4 at.%, 0.5 at.%, With a nominal composition of Ti40Zr25Cu12Ni3Be20 , 0.6 at.%, And 1 at.% On the glass forming ability (GFA) of the alloy has been investigated by means of metallography, X-ray diffraction, and differential scanning calorimetry. Experimental data in-dicates that high impurity content reduces the glass forming ability. Microalloying with 0.5 at.% Y is effective in suppressing the crystalline phase formation and alleviating the detrimental effect of oxygen in the low-purity alloy. On the contrary, in the alloy contain-high-purity element, the effective yttrium addition is less than 0.4 at.%. The results indicate that the beneficial effect of the optimum dopants is mainly due to scavenging the oxygen impurities via the formation of innocuous phase.