Metallurgical and Mechanical Properties of Underwater Laser Welds of Stainless Steel

来源 :材料科学技术学报 | 被引量 : 0次 | 上传用户:haiminglu
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this paper, the microstructures and mechanical properties of underwater laser welds of Type 304 stainless steelwere investigated. JISY308L type filler wire was used as filler wire during welding. A gas-shielding nozzle was used toform a local dry cavity surrounding the welding zone. The main results are summarized as follows: (1) The shieldingcondition of the local dry cavity severely affects the oxygen content of the weld, the worst shielding condition leadingto the oxygen content of 800×10-6, which largely increases the oxide inclusions and somewhat reduces the ferritecontent. (2) The increase of oxygen content reduces the elongation rate and reduction of area in tensile test, buthas no influence on the tensile strength. (3) In appropriate shielding condition, the mechanical properties of theunderwater laser welds can be as same as that in the air.
其他文献
Based on the characteristics of the lost foam casting (LFC) and the artificial neural network technique, a mathematicalmodel for the simulation of the melt-patt
化学污水处理是我国当前的一项重要工作之一,随着经济和技术的发展和进步,污水处理的新技术也层出不穷,为化学污水和工业废水等的处理奠定了基础.但是新的技术也同样有很多需
Quasistatic and dynamic tensile behavior of Zr52.5Al10Ni10Cu15Be12.5 bulk amorphous alloy was investigated at the strain ratesof 10-4~103 s-1 by using a Shimadzu
由于目前生产中测定磷矿浆含固量的方法需要3h,影响生产控制,为此,对磷矿浆相对密度、含固量的实验数据进行统计分析,找出两者相关关系,列出回归方程.生产中可方便测定矿浆相
临时性施工用电因作业时间短,用电器具的流动性大,作业环境比较差而成为施工作业管理的难点,这样的问题在地质队的野外作业机台表现的尤其突出.野外机台的临时用电主要包含两
In order to understand the rate-controlling process for the interfacial layer growth of brazing joints brazed with activecomposite filler materials, the thickne
Corrosion resistance of ceramic substrate glazes to molten aluminum was studied in this paper. The glazes can spreadslightly in aluminum alloy according to SEM
Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used asfilms or coatings. In this work, sol-gel prep
Through microstructure observation and X-ray diffraction analysis, the equilibrium phase constituents of Al-Zn alloythat contains 2 at. pct Cu at room temperatu
The M2 high-speed steel strip was produced by using the laboratory scale twin roll strip caster. The microstructureand eutectic carbide morphology of thus produ