【摘 要】
：
The magnetic properties of highly grain-oriented electrical steel vary along different directions. In order to investigate these prop-erties, standard Epstein s
【机 构】
：
State Key Laboratory of Roling and Automation
论文部分内容阅读
The magnetic properties of highly grain-oriented electrical steel vary along different directions. In order to investigate these prop-erties, standard Epstein samples were cut at different angles to the rolling direction. The hard magnetization direction was found at an angle of 60° to the rolling direction. To compare the measured and fitting curves, when the magnetic field intensity is higher than 7000 A/m, it is appropriate to simulate the relation of magnetic permeability and magnetization angle using the conventional elliptical model. When the magnetic field intensity is less than 3000 A/m, parabolic fitting models should be used; but when the magnetic field intensity is between 3000 and 7000 A/m, hybrid models with high accuracy, as proposed in this paper, should be applied. Piecewise relation models of magnetic per-meability and magnetization angle are significant for improving the accuracy of electromagnetic engineering calculations of electrical steel, and these new models could be applied in further industrial applications.
其他文献
Taking into account the slip flow effects, Newtonian heating, and thermal radiation, two-dimensional magnetohydrodynamic (MHD) flows and heat transfer past a pe
The boundary layer flow of a nanofluid past a stretching/shrinking sheet with hydrodynamic and thermal slip boundary conditions is studied. Numerical solutions
Three-dimensional elasticity solutions for static bending of thick functionally graded plates are presented using a hybrid semi-analytical approach-the state-sp
The effect of magnesium addition on the number, morphology, composition, size, and density of inclusions in H13 die steel was studied. The results show that the
The acoustic behavior of double-walled laminated composite panels consisting of two porous and air gap middle layers is studied within the classical laminated p
Composite films were fabricated on A356 aluminum alloy by combined anodizing and rare earth deposition.The corrosion protection effect and corrosion behavior of
Clay impurities associated with bauxite negatively affect the Bayer process for alumina production. These impurities should be removed as far as possible by a b
The Tb-Fe-Cr alloy powders were prepared by the arc melting method and high energy ball milling.The phase structure and the microstructure of the alloys powders
近年来中国城市建设投融资结构已经发生较大变化,投资主体多元化趋势日益显著,但投资主体多元化格局尚未完全形成.因此必须创新投融资模式,探索城市建设投融资长期有效的融资
This study is focused on the effect of boron addition, in the range of 0.0007wt% to 0.03wt%, on the microstructure and stress-rupture properties of a directiona