在设计和加工圆锥体(图1)时,必须根据圆锥体的长度和大小头直径差来计算出圆锥角(tgθ= )。这种计算方法不仅麻烦,而且需要很多时间。最近我们创造了一种圆锥角度换算器(图2),大大的缩短了计算时间。只要已知圆锥体长度和大小头直径差,很快就可在换算器上找出该圆锥体的角度。 In designing and machining a cone (Figure 1), the cone angle (tgθ =) must be calculated from the difference in cone length and tip diameter. This method of calculation is not only cumbersome, but also requires a lot of time. Recently we have created a cone angle converter (Figure 2), greatly reducing the calculation time. As long as the difference between the length of the cone and the diameter of the head is known, the angle of the cone can be quickly found on the resolver.