2. 您的位置
3. 首页
4. 期刊论文
5. Effect of TiH2 on preparation of closed-cell aluminum foam and its compressive behavior

Effect of TiH2 on preparation of closed-cell aluminum foam and its compressive behavior

来源 :Transactions of Nonferrous Metals Society of China | 被引量 : 0次 | 上传用户：wxn222007

【摘 要】

：

<正>The vesicant problem during the process of preparing closed-cell aluminum foam by molten body transitional foaming process was discussed and the effect of g

【作 者】

：

杨国俊 尉海军 姚广春 

【机 构】

：

SchoolofMaterialsandMetallurgy

【出 处】

：

Transactions of Nonferrous Metals Society of China

【发表日期】

：

2006年A03期

【关键词】

：

铝合金 泡沫材料 粒度 静力 TiH2  closed-cell aluminum foam  granularity  porosity  mechanica 

下载到本地 , 更方便阅读

下载此文 赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

<正>The vesicant problem during the process of preparing closed-cell aluminum foam by molten body transitional foaming process was discussed and the effect of granularity and addition of TiH2on porosity of closed-cell aluminum foam was investigated.

其他文献

Effect of second phase precipitation behavior on mechanical properties of casting Al-Cu alloys

The effect of the second phase precipitation behavior on the mechanical properties and fracture behavior of the modified casting Al-Cu alloys was investigated.

期刊

铝铜合金热处理技术机械性能沉积物Al-Cu alloys heat treatment mechanical properties preci

房地产和传统制造业：大陆台商会长最大的摇篮——大陆台商会长调查综述

期刊

台湾省中国大陆房地产业台商投资制造业

Simulation for microstructure evolution of Al-Si alloys in solidification process

<正>The numerical simulation for microstructure evolution of Al-Si alloy in solidification process is carried out with phase field model. The phase field model,

期刊

铝硅合金凝固过程显微结构数值模拟phase field model numerical simulation microstructure evol

Creep behavior on Ag particle reinforced SnCu based composite solder joints

SnCu 焊接是最答应 SnPb 的代用品焊接之一，但是它的 creep 抵抗比其它的更坏无铅焊接。粒子加强是改进 creep 抵抗的一个方法焊接合金并且比以前引起更多注意。A novelAg 粒

期刊

复合焊料SnCu蠕变断裂应力银composite solder particle-reinforcement SnCu creep ruptur

Microstructure and electrochemical performances of LiF-coated spinel LiMn2O4

LiF-coated LiMn2O4 samples were prepared via a chemical method. X-ray diffraction(XRD) patterns show that the bare LiMn2O4 and the LiF-coated LiMn2O4 samples ar

期刊

尖晶石型锰酸锂锂离子电池表面修饰氟化锂涂层spinel LiMn2O4 secondary lithium batteries surface mo

Influence of intermittently etching on quality of CVD diamond thin films

期刊

金刚石薄膜HFCVD法断续蚀刻质量hot filament chemical vapor deposition diamond film inter

Microstructure and mechanical properties of Ti(C, N)-based cermets with different molybdenum content

期刊

Ti(CN)-basedcermetsMOLYBDENUMcontentsinteringtemperaturemicrostructurea

Microstructures and mechanical properties ofAZ91D magnesium alloy processed by low pressure die cas

<正>AZ91D alloy components were cast by low pressure die casting (LPDC) process. The mechanical properties of cast components with different microstructural fea

期刊

镁合金微观结构机械性能低压条件金相AZ91 D magnesium alloys low pressure die cast microstru

Growth characteristics of MoS2 coatings prepared by unbalanced bipolar DC magnetron sputtering

MoS2 coatings were prepared by unbalanced bipolar DC magnetron sputtering under different argon pressures and for different deposition times, and the structure

期刊

磁控反应溅射二硫化钼涂层生长机制XRDmagnetron sputtering molybdenum disulfide （MoS2） coati

Photoluminescence properties of ZnSe/SiO2 composite thin films prepared by sol-gel method

期刊

ZnSe/SiO2复合材料薄膜溶胶-凝胶法制备光致发光性质ZnSe/SiO2 composite thin films sol-gel method