【摘 要】
：
利用高速液/固双相流冲蚀磨损试验机模拟不同试验条件,对改性28Cr高铬铸铁进行了不同冲蚀速度下的抗冲蚀磨损性能研究,着重讨论了该材料奥氏体基体的形变强化机理.研究结果表
论文部分内容阅读
利用高速液/固双相流冲蚀磨损试验机模拟不同试验条件,对改性28Cr高铬铸铁进行了不同冲蚀速度下的抗冲蚀磨损性能研究,着重讨论了该材料奥氏体基体的形变强化机理.研究结果表明:改性28Cr高铬铸铁材料中的高硬度相碳化物发挥了优越的抗磨削作用,同时保护了基体;在34 m/s和45 m/s冲蚀速度下,后者的冲蚀磨损量及增加速度远大于前者的,同时相变马氏体的相对体积分数从试验前的16.3%分别增加到42.2%和73.6%,冲蚀磨损过程中亚表面变形层内基体产生的相变和位错密度增加等形变强化是该材料耐冲蚀性能优异的另一
其他文献
This paper describes an improvement of the existing nominal characteristic trajectory following (NCTF) as a practical control method for a two-mass rotary point
For a gantry crane system, this paper presents a comparison between four control algorithms. These algo-rithms are being compared on simplicity, stability and r
Iterative learning control (ILC) is used to control systems that operate in a repetitive mode, improving track-ing accuracy of the control by transferring data
Following the idea of our previous paper we distinguish also in the case of Newtonian gravity as in the electrodynamics between extensive and intensive field qu
This paper deals with the re-entry predictions of the space objects from the low eccentric orbit. Any re-entering object re-enters the Earth’s atmosphere with
An adaptive neural fuzzy (NF) controller is developed in this paper for active vibration suppression in flexible structures. A recurrent identification network
将采用伽马射线测量的高能计数和低能计数作为输入参数,截面含水率和含气率作为输出参数,构建了预测水平管油气水三相分层流相分率的径向基函数神经网络.通过设计的相分率标
针对多速率码分多址系统多址干扰导致系统性能降低和使用低率检测算法使系统可用物理用户数下降的问题,提出了接收端使用天线阵列的同步上行双速率多载波码分多址系统的低速
We provide solutions to Einsteins field equations for a model of a spherically symmetric anisotropic fluid distribution, relevant to the description of compact