China-made 5-axis simultaneous contouring CNC machine tool and domestically developed industrial computer-aided manufacture (CAM) technology were used for full crown fabrication and measurement of crown accuracy,with an attempt to establish an open CAM system for dental processing and to promote the introduction of domestic dental computer-aided design (CAD)/CAM system.Commercially available scanning equipment was used to make a basic digital tooth model after preparation of crown,and CAD software that comes with the scanning device was employed to design the crown by using domestic industrial CAM software to process the crown data in order to generate a solid model for machining purpose,and then China-made 5-axis simultaneous contouring CNC machine tool was used to complete machining of the whole crown and the intal accuracy of the crown intal was measured by using 3D-MicroCT.The results showed that China-made 5-axis simultaneous contouring CNC machine tool in combination with domestic industrial CAM technology can be used for crown making and the crown was well positioned in die.The intemal accuracy was successfully measured by using 3D-MicroCT.It is concluded that an open CAM system for dentistry on the basis of China-made 5-axis simultaneous contouring CNC machine tool and domestic industrial CAM software has been established,and development of the system will promote the introduction of domestically-produced dental CAD/CAM system.