论文部分内容阅读
Effect of Acid Rain Erosion on Steel Fiber Reinforced Concrete
【机 构】
：
College of Materials & Mineral Resources, Xi’an University of Architecture and Technology, Xi’an 710
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2017年1期
其他文献
The impact of rare earth element La on the microstructure and hot crack resistance of ADC12 alloy was analyzed. The additive amount of La was 0％, 0.3 wt％, 0.6 wt％ and 0.9 wt％, respectively. The results showed that, with the increase of the additive amount
Crystallization Behavior of Polymer Derived Silicon Carbide Sintered Through Microwave Heating Techn
A self-crosslinkable liquid highly branched polycarbosilane (LHBPCS) with 5.07% vinyl group and a C/Si ratio of 1.33 was used as the precursor to prepare SiC ceramic material. Microwave heating technique and conventional heating method were applied for th
The yttrium iron garnet (YIG) thin films prepared by the sol-gel method and rapid thermal annealing (RTA) process for integrated inductor are investigated.The X-ray diffraction (XRD) results indicate that the YIG film annealed above 650 ℃ is poly-crystall
The objective of this paper was to find new modifier to improve the aging resistance and low temperature cracking resistance of asphalt. To investigate the aging resistance of modified asphalt binders, mesoporous nano-silica (doping Ti4+) was used as a as
First-principles calculations have been carried out to investigate the effects of alloying elements (Zn, Li, Y and Sc) on the electronic structure, elastic and thermal properties of Mg solid solution. The calculated cohesive energies show that Mg-Sc has t
Influence of the C-S-H Amount on [Cl-]/[OH-]Ratio of Simulated Concrete SPS and the Corrosion Suscep
Two kinds of simulated concrete pore solutions (SPSs) were treated with different amounts of synthetic calcium silicate hydrate (C-S-H).The variation of the [Cl-]/[OH-] ratio in SPS was measured and the corrosion susceptibility of carbon steel in the SPS
A simple non-isocyanate route synthesizing thermoplastic polyurethanes(TPUs)with good thermal and mechanical properties is described.Melt transurethane polycondensation of dimethyl 1,6-hexamethylene dicarbamate with 1,4-butanediol and 1,6-hexanediol was c
The Cu-15Cr in-situ fiber-reinforced composites sheets were prepared by cold drawing combined with cold rolling process. The evolution process of Cr fibers was studied, and when cold rolling reduction ε = 95％, the morphology of Cr fiber at different annea
A facile microwave-assisted hydrothermal route has been developed for a synthesis of versatile carbon materials. The monosaccharide fructose aqueous solution was adopted as the starting material, and the pH of the solution was adjusted to be in acidic (pH
Electropulsing is introduced into the cutting process for quenched and tempered 45 steel, which is a novel method to improve the material machinability compared with the conventional cutting process. The effects of electropulsing on cutting performances,