【摘 要】
：
After purified by mixture of sulfuric acid and nitric acid, the multi-walled carbon nanotubes(MWNTs)were modified with stearic acid(SA). The modified carbon nan
【机 构】
：
College of Materials Science and Engineering
论文部分内容阅读
After purified by mixture of sulfuric acid and nitric acid, the multi-walled carbon nanotubes(MWNTs)were modified with stearic acid(SA). The modified carbon nanotubes as lubricant additive were utilized to prepare lubricant, and the effects of carbon nanotubes on the tribological properties were investigated by using a pin-on-plate wear tester. The surface structure of MWNTs was examined by transmission electron microscopy, Raman spectroscopy and infrared spectroscopy. The results show that the surfaces of MWNTs are coated with a modified layer of SA. Furthermore, the modified MWNTs as lubricant additive can effectively improve the friction-reduction and antiwear ability of lubricant. The friction coefficient of base lubricant decreases by about 10% and the wear loss of base lubricant decreases by 30%-40% when the concentration of modified MWNTs in lubricant is 0.45%. In addition,the mass ratio of SA to MWNTs influences the friction-reduction and anti-wear ability of the modified MWNTs as lubricant additive. The optimum mass ratio of MWNTs to stearic acid is about 3: 8 - 1 : 2.
其他文献
According to the theory of the stochastic trajectory model of particle in the gas-solid two-phase flows, the two-phase turbulence model between the blades in th
The pressureless infiltration kinetics was investigated by plotting the infiltration distance as function of the infiltration time. The effects of key process p
The structural and magnetic properties of Pr0.1CexTb0.9-x Fe1.9 alloys were investigated by using X-ray diffraction, AC susceptibility, VSM and standard strain
A series of stearates with different rare-earth ion were investigated as thermal stabilizers for rigid PVC at 180 ℃ in air. Their stabilizing efficiency was ba
Small amounts of nanocrystalline Al2 O3 particles were doped in WC-Co nanocrystalline powders to study their reinforcing effects, and spark plasma sintering tec
The droplet size distribution with large-holed compound sieve tray operating in the spray regime is measured by using a double electrical probes technique in a
A series of transparent casting polyurethane resins (TCPU) were synthesized from cycloaliphatic diisocyanate (IPDI or H12MDI), polyol, chain extender, crosslink
The density of liquid Ni-Ta alloys was measured by using a modified sessile drop method. It is found that the density of the liquid Ni-Ta alloys decreases with
Hot compression was conducted at a Thermecmaster-Z simulator, at deformation temperatures of 800～1040℃, with strain rates of 0.001～50 s-1 and height reduction of
Ingot metallurgy (IM) aluminum has long been the subject and attracted the attention of many metallurgists and textural researchers of materials. Due to the int