A 5-GHz programmable frequency divider in 0.18-μm CMOS technology

来源 :半导体学报 | 被引量 : 0次 | 上传用户:guipian110
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A 5-GHz CMOS programmable frequency divider whose modulus can be varied from 2403 to 2480 for 2.4-GHz ZigBee applications is presented.The divider based on a dual-modulus prescaler(DMP) and pulse-swallow counter is designed to reduce power consumption and chip area.Implemented in the 0.18-μm mixed-signal CMOS process,the divider operates over a wide range of 1-7.4 GHz with an input signal of 7.5 dBm;the programmable divider output phase noise is -125.3 dBc/Hz at an offset of 100 kHz.The core circuit without test buffer consumes 4.3 mA current from a 1.8 V power supply and occupies a chip area of approximately 0.015 mm~2.The experimental results indicate that the programmable divider works well for its application in frequency synthesizers. A 5-GHz CMOS programmable frequency divider whose modulus can be varied from 2403 to 2480 for 2.4-GHz ZigBee applications is presented. The divider based on a dual-modulus prescaler (DMP) and pulse-swallow counter is designed to reduce power consumption and the divider operates over a wide range of 1-7.4 GHz with an input signal of 7.5 dBm; the programmable divider output phase noise is -125.3 dBc / Hz at an offset of 100 kHz. The core circuit without test buffer consumes 4.3 mA current from a 1.8 V power supply and occupies a chip area of ​​approximately 0.015 mm ~ 2. The experimental results that that programmable divider works well for its application in frequency synthesizers.
其他文献
基于有限元软件ABAQUS建立了激光弯曲陶瓷基片的三维分析模型,对激光弯曲成形Al2O3陶瓷片进行了数值模拟;分析了激光弯曲陶瓷片的成形机理,研究了激光扫描过程中温度场、应力
当今社会发展迅速,旅游业作为一个新兴的朝阳产业,在当前市场经济中所占比重与日俱增,我国在线旅游服务业二十世纪起迅速崛起发展至今,当前的前景广阔,但当下国内的在线旅游