【摘 要】
：
Optical transmission at 532 nm from nonabsorbing disordered porous silicon dioxide has been studied experimentally. The transmission behaviors can be adjusted by filling the pores with liquids of different refractive indics, which are analyzed based on th
【机 构】
：
TheMOEKeyLaboratoryofWeakLightNonlinearPhotonics,TEDAAppliedPhysicsSchoolandSchoolofPhysics,NankaiUn
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
Optical transmission at 532 nm from nonabsorbing disordered porous silicon dioxide has been studied experimentally. The transmission behaviors can be adjusted by filling the pores with liquids of different refractive indics, which are analyzed based on the theory of diffusion in a weak scattering regime. In our experiment, the transmission coefficient changes from a value less than 1% to one that is greater than 75%, that is, the opaque sample becomes transparent, which means that the transport mean free path of light within the material has been effectively adjusted. In addition, this method is a useful nondestructive method to derive the refractive index of an unknown bulk porous material.
其他文献
无透镜数字全息计算成像可以实现大视场高分辨率三维成像,但面临成像分辨率低和信噪比差的问题。为此,构建了基于衍射传输的无透镜压缩数字全息成像模型,开发了基于全变分正则化约束和两步迭代收缩阈值的优化算法,抑制了全息重建的二阶项噪声与孪生像噪声,并在重建模型中引入滤波层,提高了三维图像的重建信噪比。同时,提出了基于有效抗混叠区域的压缩全息分块并行重建算法,提升了压缩数字全息重建效率。建立了基于双角度照明
为了快速准确地对含有噪声及欠采样区域的包裹相位图进行展开，采用理论分析与计算机模拟及实验验证相结合的方法，对基于快速傅里叶变换(FFT)的最小二乘法(FFT-LS)、基于离散余弦变换(DCT)的最小二乘法(DCT-LS)、基于横向剪切干涉的最小二乘法(LS-LS)和预条件共轭梯度法（PCG）的四种相位解包裹算法作了对比研究。结果表明：DCT-LS算法运行速度最快，LS-LS算法次之，PCG算法速度最慢,PCG算法对于噪声的免疫力最强,LS-LS算法处理欠采样的效果最好。
Raman spectroscopy has strong potential for providing non-invasion diagnosis of cancers. In this paper, micro-Raman spectroscopy is used to diagnose one most common liver cancer, hepatocellular carcinoma (HCC). The statistical analyzes, including t-test,
介绍了一种基于发光二极管 (LED) 的光纤耦合长程差分吸收光谱(LP-DOAS)系统，用于测量大气中的SO2和O3。根据SO2和O3所在的吸收波段，选择了两种不同波长的紫外LED作为系统光源。当吸收光程为700 m时，SO2和O3的探测限分别为0.8×10-9和7.4×10-9。将该系统测量结果与传统基于氙灯LP-DOAS的测量结果进行了对比，结果显示两者具有较好的一致性，测量SO2和O3的相关性分别为0.987和0.992。测量结果表明，通过光纤耦合方式来提高光源耦合效率后，采用以LED为光源的LP-
提出了一种光通过超声驻波及超声行波后能产生高衬比度相干条纹的新术,利用超声驻波调制光束与超声行波作用后的相关衬比度来选定相干波束.从理论上分析了其相关叠加的结果,并在实验中得到了证实.
提出了采用双反馈来提高光学双稳系统静态稳定度的方法。理论分析和实验均表明,采用这种方法可使稳定度获得大幅度提高,非常明显地改善了系统输出的稳定性。
在气雾化制粉过程中，坩埚熔蚀形成纳米夹杂物是难以避免的。采用选择性激光熔融设备对添加有纳米氧化铝粉的18Ni300模具钢粉进行3D打印，研究纳米氧化铝添加量对成型件组织和力学性能的影响规律，确定杂质的容忍限度，为气雾化制粉提供决策依据。研究结果表明，当纳米氧化铝添加量（质量分数）不高于1%时，打印态样件及低温时效热处理态样件中未发现第二相偏析现象；当纳米氧化铝添加量高于1%时，出现了Ni3（Al，Ti）和Al2O3偏析相，内部裂纹和球形气孔
DNA tetrahedral nanostructures are considered to be new nanocarriers because they can be precisely controlled and hold excellent penetration ability to the cellular membrane. Although the DNA tetrahedral nanostructure is extensively studied in biology and