由中汽总公司南京汽车研究所研制成功的一种除油污新材料-J D型固体除油剂,于最近在江都金属表面处理材料厂试制成功,并开始投入批量生产。该化工材料呈疏松状粉剂,其碱度为9.5至10个点,酸度值为10,工作温度在70℃左右。使用时将粉剂按配制要求,每升水中加粉剂24克,溶解加热后即可使用,工作液的 A new degreaser-type solid degreaser JD, successfully developed by Nanjing Automobile Research Institute of China National Steam Turbine Corporation, was successfully trial-produced in Jiangdu Metal Surface Treatment Material Factory recently and was put into mass production. The chemical material is loose powder, the alkalinity of 9.5 to 10 points, the acid value of 10, the working temperature at about 70 ℃. The use of the powder according to the preparation requirements, plus powder per liter of water, 24 grams, dissolved heating can be used after the working fluid