论文部分内容阅读
过去的一年,是曲折和希望并存的一年.行业里的每个人都感受到了行业发展面临的重重困境,也看到了经济社会发展和行业转型带来的新机遇,更意识到创新依旧是企业发展的永恒主题.
顺势而为,方能走得更远
【摘 要】
：
过去的一年,是曲折和希望并存的一年.行业里的每个人都感受到了行业发展面临的重重困境,也看到了经济社会发展和行业转型带来的新机遇,更意识到创新依旧是企业发展的永恒主题.
【出 处】
：
中国建筑装饰装修
【发表日期】
：
2021年12期
其他文献
The slag-free self-shielded flux-cored wire was fabricated to apply for the narrow gap welding. The results showed that narrow gap welding shows lower welding spatter compared with hardfacing except under voltage of 30 V and current of 260 A. The depositi
Aluminium matrix composites with 70％ volume fractions of SiC particles, as the reinforcements, were brazed in the vacuum fur-nace using Al-Si-Ti-Cu-In alloy as filler metal. The microstructure and constituent of the joints were examined by means of SEM an
The corrosion performance of aluminum/steel contact and aluminum/steel FSW joint in 3.5 wt.％ NaCl solution were analyzed using potentiostatic tests. The post-corrosion microstructure of the welding joint was characterized by optical microscope (OM), scann
The effect of fiber laser on MIG arc was investigated with 8 mm 7075-T6 high strength aluminum alloy as base material. The arc shape, droplet transfer form and electrical signal in the process of MIG welding and laser-MIG hybrid welding were analyzed. The
Friction stir welding (FSW), as a growing welding technology, from its genesis in 1991, was attended by many researchers in in-terdisciplinary fields of science and engineering. The current paper presents a bibliometric analysis of the subject and can be
In this paper, the microstructure of narrow gap laser welded joint of 45 mm Ti6321 titanium alloy was characterized. The micro-structure characteristics of Laser self-fusion and laser-multi-pass-narrow-gapfilling layer were observed by metallographic micr
党的十九届六中全会召开以来,在中央和国家机关行业协会商会第一联合党委的领导和指示下,中国建筑金属结构协会党支部高度重视十九届六中全会精神学习的任务,通过“自学+集中学”相结合,多措并举地开展系列学习活动.
Numerical simulation of residual stress and deformation for submerged arc welding of Q690D high stre
The finite element simulation software SYSWELD is used to numerically simulate the temperature field, residual stress field, and welding deformation of Q690D thick plate multi-layer and multi-pass welding under different welding heat input and groove angl
在京津冀和长三角区域跨省市联网ETC示范工程实施的后期,交通运输部就开始考虑ETC的推广问题,为此要求部公路科学研究院(以下简称“公路院”)评估国内ETC应用的社会和经济影响、调查ETC带动的高新技术产业的情况、分析存在的问题,并就下一步的工作提出建议.2009年末至2010年10月期间,公路院向交通运输部公路局提交了一系列报告,包括《全国高速公路不停车收费情况调查》《关于制定国家推进不停车收费系统政策的建议》《不停车收费产业对经济和社会的支持情况》《关于制定不停车收费系统推广和补贴政策的建议》等.
Four kinds of aluminum based moderate temperature filler metals used for vacuum brazing of 6061 aluminum alloy were pre-pared by rapid solidification-isothermal rolling. The effects of alloy elements content on the melting characteristics of filler metals