论文部分内容阅读
A New Two-staged Model to Predict Corrosion Degree of Steel Bars in Cracked Concrete Area
【机 构】
：
School of Civil Engineering, Central South University, Changsha 410075, China; College of Civil Engi
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2014年5期
其他文献
Six representative parent rocks of sand, including limestone, quartzite, gneisses, granite, Basalt and Marble were selected to conduct a systematical research on the effects of various lithologies of manufactured sand on the workability, mechanism propert
Loose sand particles could be cemented to sandstone by bio-cement (microbial induced magnesium carbonate). The bio-sandstone was firstly prepared, and then the compressive strength and the porosity of the sandstone cemented by microbial induced magnesium
Two types of solutions (ZnSO4, MgSO4) were selected to study the influence of mineral admixtures on the electro-deposition healing effect of concrete cracks. Four parameters (i e, rates of weight gain, surface coating, crack closure and crack filling dept
Microstructure and Deposition Mechanism of C/SiCN Composites Prepared by Rapid Electro-thermal Pyrol
Carbon nanotubes (CNTs) were extensively explored for their beneficial use in nervous system tissue engineering. However, an important concern regarding the use of CNTs is their toxicity during the interaction between cells and the nano particles. The rat
Amorphous Ti-Cu-Zr-Nifi ller foils with low melting point of 1 133 K were synthesized using a melt-spinning method in argon atmosphere. A Ti2AlNb based alloy was brazed at 1 153-1 223 K for 600-3 000 s. The effects of brazing temperature (Tb) and time (tb
A series of novel water soluble chitosan derivatives as gene vectors was synthesized. The delivery systems were tested for their ability to form complexes with plasmid DNA by utilizing agarose gel electrophoresis, particle size analysis, zeta potential me
Preparation and Action Mechanism of Inclusion Complex ofb-cyclodextrin and Sulfurized Isobutylene as
The inclusion complex ofβ-cyclodextrin (β-CD) and sulfurized isobutylene (T321) was prepared with a co-precipitation method. The tribological properties of the complex with different concentrations were investigated by a four-ball tester in the solution o
The evolution of hardness homogeneity in commercially pure titanium processed by equal channel angular pressing (ECAP) for up to 4 passes following route C at room temperature using a die of 90° was investigated by recording the microhardness on the cross