Quasi-static and Dynamic Compressive Fracture Behavior of SiCf/SiC Composites

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:JIABUTUO
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
To understand the quasi-static and dynamic compressive mechanical behavior of two-dimensional SiCfi ber-reinforced SiC composites (2D-SiCf/SiC), their compressive behavior at room temperature was investigated at a strain rate from 10?4 to 104 /s, and the fracture surfaces and damage morphology were observed. The results show that the dynamic failure strength of 2D-SiCf/SiC obeys the Weibull distribution, and the Weibull modulus is 5.66. Meanwhile, 2D-SiCf/SiC presents a transition from brittle to tough with a decrease of strain rate, and 2D-SiCf/SiC has a more signifi cant strain rate sensitivity compared to the 2D-C/SiC composites. The failure mode of 2D-SiCf/SiC depends upon the strain rate.
其他文献
We studied the effects of sintering temperature on FeCuCo based pre-alloyed powder for diamond bits. The FeCuCo composite was fabricated by co-precipitation method. With the addition of tungsten carbide (WC), sintering under different temperatures was inv
In order to understand the effect of powders ground from reactive sandstone replacing cement on reducing or suppressing alkali-silica reaction (ASR), and to identify the mechanism of suppressing ASR by this powders, mortar and paste containing reactive sa
The micro-mechanical response of asphalt mixtures was studied using the discrete element method. The discrete element sample of stone mastic asphalt was generated first and the vehicle load was applied to the sample. A user-written program was coded with
We prepared Pb-0.3wt%Ag/Pb-WC (WC stands for tungsten carbide, the same below) composite inert anodes by double-pulse electrodeposition on the surface of Pb-0.3wt%Ag substrates, and investigated the electrochemical properties of the composite inert anodes
We discussed the oxidation differential and mechanisms on different planes of pyrite. The experimental results show that the oxidation priority is: (222) plane> (200) plane> (200) plane, and there is no direct correlation between the crystal plane index,
The fine powders of Mn-Zn ferrites with uniform size were prepared via chemical co-precipitation method. X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM), frequency dependence of permeability and me
Microstructural features including pore size distribution, cell walls and phase compositions of magnesium oxychloride cement foams (MOCF) with various MgO powders and water mixture ratios were studied. Their influences on compressive strength, water absor
Recycled ceramic mixed sand (RCMS) was obtained by partially replacing ultra-fine sand with recycled ceramic coarse sand (RCCS). The effects of RCCS replacement rate on the apparent density, workability, compressive strength and splitting tensile strength