喷雾器构造不同修理也不同 ,现在常用的间歇式喷雾器构造是 :抽皮顶在弹簧上 ,另一头套在杠杆上 ,杠杆另一头有个小凹槽 ,顶在扳机后下方凹槽内。如果抽不上水 ,就是抽皮磨细了。用手压缩杠杆使弹簧回缩 ,把杠杆从扳机后下方取下 ,把抽皮和弹簧从气室内拿出来。另用一细钢丝 , Sprayer structure is different from the repair is different, now commonly used intermittent sprayer structure is: the top of the skin on the spring, the other set on the lever, the lever has a small groove at the other end, the top of the trigger in the lower groove. If you can not pump the water, it is smooth and smooth. Compress the lever by hand to retract the spring, remove the lever from behind the trigger, and remove the skin and spring from the air chamber. Another with a thin wire,