目前我国中深孔采矿是个较为突出的薄弱环节,现仍采用风动凿岩机作业,存在效率低、能耗大,噪音大、工作环境差和作业成本高等问题。为此广西自治区科委于1976年6月委托我院与桂林冶金机械厂和广西大厂矿务局合作研制YCT—1型全液压采矿台车,1984年1月在广西大厂矿务局铜坑锡矿进行工业性试验,经过近二年的实践证明设备运行可靠,性能达到了设计要求。 YCT—1型全液压采矿台车适用于3.0×3.2～4.5×3.8m巷道中配用凿岩机型号为YYG～250A型,最大孔深为25m。支臂型式为单臂摆式,平移范围1.6m,扇形摆角100°。推进器采用了套筒双级等推力油缸,结构紧凑,工作平稳可靠,为国内首创。根据我国液压件的生产水平,液压系统采用冲击、回转、推进和调幅分别控制多泵系统。底 At present, China’s deep-hole mining is a more prominent weakness, and now still using the wind-driven rock drill operations, there are low efficiency, high energy consumption, noise, poor working conditions and high operating costs. To this end Guangxi Autonomous Region Commission in June 1976 commissioned our hospital and Guilin Metallurgical Machinery Factory and Guangxi Dachang Mining Authority to develop YCT-1-type hydraulic mining truck, January 1984 in Guangxi Dachang Mining Bureau Copper Hang Tin Mine industrial test, after nearly two years of practice proved that equipment is running reliably, the performance has reached the design requirements. YCT-1 full hydraulic mining trolley for 3.0 × 3.2 ~ 4.5 × 3.8m tunnel equipped with rock drill model YYG ~ 250A, the maximum hole depth of 25m. Arm type swing arm type, translation range 1.6m, fan swing angle of 100 °. Propeller used two-tier sleeve thrust cylinder, compact structure, stable and reliable, for the first domestic. According to the production level of hydraulic components in our country, hydraulic system adopts impact, rotation, propulsion and amplitude modulation to control multi-pump system respectively. bottom