【摘 要】
：
An in-situ TiCP/Al composite was prepared by a thermal explosion/quick pressure method (TE/QP). The effect of Al content on the reaction temperature as well as
【机 构】
：
Key Laboratory of Metastable Materials Science & Technology,Hengdian Group Xinna Electronic Co.
【基金项目】
：
Doctoral Fund of the Education Department of Hebei Province
论文部分内容阅读
An in-situ TiCP/Al composite was prepared by a thermal explosion/quick pressure method (TE/QP). The effect of Al content on the reaction temperature as well as the reaction rate has been studied. Phase constituents and the microstructure of the composites and the particle size of the reinforcement were analysed using X-ray diffraction (XRD)and scanning electron microscopy (SEM). The results have shown that TiCP/Al composite with 40～70 vol. pct TiC particle reinforcement and high relative density can be directly obtained by TE/QP. TiC is the only reaction product when Al content in Al-Ti-C system is no more than 60 vol. pct, but Al3Ti phase will also form when Al content is more than 60 vol. pct. Increasing Al content prolongs the initial reaction time, reduces the highest reaction temperature and the reaction rate, and decreases the size of TiC particles. In addition, the microstructure of TiCP/Al composite and the structure of interface between TiCP and Al are studied using SEM and transmission electron microscopy (TEM). The results show that the in-situ synthesized TiC particle has fcc cubic structure. The orientation between TiC particles and Al matrix can be described as (220)Al∥(022)TiC and [112]Al∥[011]TiC. Results of the mechanical property tests reveal that the ultimate strength (σ) and modulus (E) are 687 MPa and 142 GPa respectively when the Al content is 40 vol. pct. On contrary, δ elongation increases by 3.2% with increasing Al content.
其他文献
An effective ensemble should consist of a set of networks that are both accurate and diverse. We propose a novel clustering-based selective algorithm for constr
An AZ61 alloy was subjected to hot compression at temperatures ranging from 523 K to 673 K,with strain rates of 0. 001 - 1 s-1. Flow softening occurs at all tem
Mixed Al-Si, Al-Si-SiC and Al-Si-W powders were employed as insert layers to reactive diffusion bond SiCp/6063 MMC. The results show that SiCp/6063 MMC joints b
The bioleaching of a marmatite flotation concentrate with a moderately thermoacidophilic iron-oxidizing bacterial strain (MLY) is influenced significantly by te
An extensive investigation was made on the effects of micro-alloying with small amounts of Sc and Mn on the microstructure and mechanical properties of the Al-M
Maximum solid solubility (Cmax) of different transition metals in metal solvent can be described by a semi-empirical equation using function Zf that contains el
The calculations of total energy, band structure, and electronic density of states and Mulliken population analysis of β-LaNi5 Hx (5≤x≤8) were performed by a
The effect of small addition of Sc on the microstructural evolution in Al-15Ag alloy was investigated by Monte Carlo simulation and transmission electron micros
A model to calculate the thermodynamic functions of the pure metal nanocrystals has been developed, with the consideration of the effects of both the interfaces
In this paper, the authors present a novel mutual authentication and key agreement protocol based on the Number Theory Research Unit (NTRU) public key cryptogra