论文部分内容阅读
我厂在1982年更换了催化装置再生器旋风分离器(以下简称“旋分器”)系统,该系统是回收催化剂的关键设备。按装置处理量40万吨/年蜡油估算,旋分器系统回收催化剂的效率每提高0.01%,催化剂单耗就可降低0.2公斤左右,反之则会造成催化剂大量跑损。新旋分器是北京石油设计院设计,荆门炼油厂预制,由石油部一公司在现场组对安装的。为保证安装质量,我厂成立了质量专业小组,配合施工单位进行工作,经过共同努力,取得了较好的安装质量。1982年9月标定结果表明:回收催化剂效
I plant in 1982 replaced the catalytic device regenerator cyclone (hereinafter referred to as “cyclone”) system, the system is the key catalyst recovery equipment. According to the device processing capacity 400000 tons / year of oil estimated, cyclone system, the catalyst recovery efficiency of 0.01% for each catalyst can reduce the unit consumption of about 0.2 kilograms, otherwise it will cause a large number of catalyst running loss. Spin Turner is designed by Beijing Petroleum Design Institute, Jingmen Refinery prefabricated by the Ministry of Oil Company in the field of a group to install. In order to ensure the installation quality, I set up a quality professional team of plants, with the construction unit to work, through joint efforts, and achieved good installation quality. September 1982 calibration results show that: recovery of the catalyst effect