【摘 要】
：
Through the differentiating and integrating process, a mathematical model for tempering time effect on quenched steel was derived based on the attribute of stat
【机 构】
：
State Key Laboratory of Die & Mould Technology,Department of Mechanical Engineering
论文部分内容阅读
Through the differentiating and integrating process, a mathematical model for tempering time effect on quenched steel was derived based on the attribute of state function and the general equation of Hollomon parameter, which correlates the tempering hardness with the tempering time at different tempering temperature. Using the established model, thelinear relationship between the tempering hardness and the tempering time in logarithm was proved theoretically, and the tempering hardness for various tempering time was reduced to the measurement and calculation of a hardness experiment tempered for 1 h at different tempering temperatures. Moreover, the hardness of steel 42CrMo and T8Mn tempered for various times at 200～600℃ was calculated using this method. The predicted results are in good agreement with those of the available experiments.
其他文献
Micro-laminated ZrO2-Al2O3 coatings were prepared by electrochemical depositing ZrO2 film and Al2O3 film alternatively in ethanol solutions containing aluminum
Fuel cell using borohydride as the fuel has received much attention. AB5-type hydrogen storage alloy used as the anodic material instead of noble metals has bee
The formation, thermal stability and mechanical properties of Misch metal (Mm)-based alloy bulk metallic glasses (BMGs) with composition of Mm55Al25Cu10Ni5Co5 w
White body-color (Y, Gd)BxV1- xO4-x :Eu3 + phosphors were prepared by coprecipitation reaction. Under VUV excitation at 147 nm, the red emission colorimetric pu
Macroporous silicon nitride (Si3N4) ceramics with high strength, uniform structure and relatively high porosity were obtained by gelcasting and carbonthermal re
Sn-Ag alloy system has been regarded as one of the most promising lead-free solder to substitute conventional Sn-Pb eutectic solder. But the formation of bulk A
Sebisty effect describes the unusual fact that the thickness of the hot-dip galvanizing coating on the steel containing 0.12%-0.25% silicon decreases with incre
A tunable dual-broad-band branch-line coupler (BLC) utilizing composite right/left-handed (CRLH) transmission lines is presented. Two λ/4 segments consisting o
MoS2 coatings were prepared by unbalanced bipolar DC magnetron sputtering under different argon pressures and for different deposition times, and the structure
Nominal composition of Ca1 - xZnxTiO3: 0. 002Pr3 + ( x = 0. 000 ～ 0. 200) phosphors were prepared by conventional solid reaction route. XRD and PL measurements w