【摘 要】
：
X-ray diffractometry(XRD), optical microscopy(OM), scanning electron microscopy(SEM) were used to study the fatigue fracture of the T7451 Al-Zn-Mg-Cu alloy (470
【机 构】
：
School of Materials Science and Engineering
论文部分内容阅读
X-ray diffractometry(XRD), optical microscopy(OM), scanning electron microscopy(SEM) were used to study the fatigue fracture of the T7451 Al-Zn-Mg-Cu alloy (470 ℃, 60 min+115 ℃, 8 h+165 ℃, 16 h). The study reveals mainly the microscopic structure of the alloy in the process of crack formation and crack growth. The fatigue fracture is characterized by three zones: fatigue crack source zone, fatigue crack propagation zone and fatigue fracture zone. The fatigue damage preferably incubates at the fractured inclusion particles at or near (about 25 μm) the specimen free surfaces, and these brittle Fe-rich intermetallic inclusion particles are (7-10) μm×(11-14) μm in size. Some features such as "feather-like", "river and range" and boundary extrusions can be observed in the fatigue propagation zone, and in the fatigue fracture zone the surface is rough and uneven.
其他文献
Plasma tungstening followed by carburization (W-C duplex treatment) was performed on the Ti2AlNb-based (O phase) alloy by using the double glow plasma process t
Ion implantation is a powerful method for fabricating nanoparticles in dielectric. For the actual application of nanoparticle composites, a careful control of n
A accelerated arithmetic algorithm of the dynamic computing regions was designed, and 3-dimensional numerical simulation of isothermal solidification for a bina
Phase transition process and magnetic entropy change -ΔS of Ni_(55.2)Mn_(18.6)Ga_(26.2-x)Gdx(x=0, 0.05, 0.15) alloys were studied.Ni_(55.2)Mn_(18.6)Ga_(26.2-x)
Complex loading paths were realized with cruciform specimens and biaxial loading testing machine. Experimental method for determining the subsequent yield locus
To protect carbon materials from oxidation, SiC coatings were prepared on carbon/carbon(C/C) composites and graphite by chemical vapor reaction. SEM and XRD ana
Porous preforms were fabricated by cold-pressing process using powder mixture of TiC, TiO_2 and dextrin. After pyrolysis and sintering, Al melt was infiltrated
Polycrystalline La_(1-x)Na_xFeO_3 (0.0≤x≤0.3) solid solutions were synthesized by a solution combustion method using glycine as a fuel. The combustion synthes
In order to synthesize the targeting drug carrier system, magnetic chitosan-5-fluorouracil nano-particles were prepared by using 5-fluorouracil (5-Fu) as model
15% (volume fraction) SiC_p/8009Al metal matrix composites(MMCs) prepared by spray co-deposition were hot-extruded and rolled to investigate the effects of poro