论文部分内容阅读
Texture Evolution, Formability and Ridging Resistance of a Sn-bearing Ferritic Stainless Steel Under
【出 处】
：
金属学报（英文版）
【发表日期】
：
0年期
其他文献
A calcium stearate-based hydrophobic coating was formed on an anodized magnesium alloy by the electrodeposition method.The influences of the working voltages on the characteristics of the coatings were researched.The results indicate that the working volt
In the current work,biodegradable Fe-30Mn-XAg (X=1,2,5,10 wt％) alloys were prepared by the rapid solidification with copper-mold-casting technology.Phase analysis demonstrates that Fe-30Mn-XAg alloys consist of austenite γ phase with a fcc structure and m
Effect of Cl- Concentration on the SCC Behavior of 13Cr Stainless Steel in High-Pressure CO2 Environ
An effect of Cl-concentration on the stress corrosion cracking (SCC) behavior of 13Cr stainless steel was investigated by employing electrochemical measurements and the slow strain rate tensile tests· These tests were conducted in various solutions with d
Improvement of Bonding Strength of Horizontal Twin-Roll Cast Steel/Aluminum Clad Sheet by Electromag
Electromagnetic field is an available online method to increase bonding strength of clad sheet manufactured by horizontal twin-roll casting (HTRC).In this paper,an electric current pulse (ECP) and a complex field (static magnetic field (SMF) together with
The improvement of mechanical properties of ZK60 processed by asymmetric reduction rolling (ARR) was investigated in this paper.The grain refinement and basal texture intensity decrease were attributed to the introduction of shear stress produced by ARR p
Effect of Cr Doping on the Surface Characteristics of Ni Metal Studied with First-Principles Calcula
The influence of Cr doping on the surface characteristics of Ni metal,including the surface energy,work function,adsorption and dissociation,has been investigated by means of first-principles calculation based on density functional theory.The results reve
The different types of metal powder used for selective laser melting (SLM) process would cause distinct corrosion behavior due to the uniformity of the obtained microstructure.The SLM-produced Ti-5Cu alloy using atomized Ti-5Cu metal powder (SLMed Ti-5Cu)
The microstructures and mechanical properties,especially creep properties,of the NiCrFe-based alloys with various contents of phosphorus and iron were investigated.The results showed that the tensile yield strength decreased with increasing iron contents
Influence of Static Low Electromagnetic Field on Copper Corrosion in the Presence of Multispecies Ae
The effects of low electromagnetic field (EMF) (B =2 mT) on the corrosion of pure copper in the absence and presence of multispecies marine aerobic bacteria were investigated in this work.The results showed that EMF has an inhibitory effect on copper meta