一、概述润滑油调合生产,目前是采用传统的调合工艺,即将各组分油按一定比例送入调合罐,在调合罐中用压缩风和泵循环搅拌,经过静止做空白分析后,再加各类添加剂,再搅拌再静止,最后做全分析,合格后暂在中间罐贮存,出厂前再打入商品罐。这种生产方式周期长、操作繁琐、效率低、能耗大,往往堵塞工艺装置后路,造成循环;由于添 First, an overview Lubrication blending production, the current is the use of traditional blending process, the composition of the oil will be a certain percentage into the blending tank, mixing tank with compressed air and pump cycle stirring, after doing a blank analysis After the addition of various additives, and then stirred again and again, and finally make a full analysis, after the temporary storage in the middle of the tank, before entering the product tank. This long cycle of production methods, cumbersome operation, low efficiency, high energy consumption, often clogging the process plant posterior, resulting in cycle; due to Tim