在国内实际工作中,一般估计模板摩擦力和附着力共为150公斤/米~2(混凝土容重为2400公斤/米~3)。根据这一估计,规定滑模施工浇筑混凝土的最小厚度为150毫米。在部分墙体中进行的实验研究表明,即使混凝土的质量和模板的移动没有偏差,上述标准荷载也只适用于局部情况。当模板低速上升和用振捣器捣实混凝土时,产生的摩擦力和附着力会大大超过标准 In domestic practical work, it is generally estimated that the template friction and adhesion are 150 kg/m~2 (concrete density is 2400 kg/m~3). Based on this estimate, it is specified that the minimum thickness of concrete for slip form construction is 150 mm. Experimental studies carried out in part of the walls show that even if the mass of the concrete does not deviate from the movement of the formwork, the above standard loads apply only to local conditions. When the stencil is raised at low speed and the concrete is compacted with a vibrator, the friction and adhesion generated will greatly exceed the standard.