洗衣机控制台中一零件,(如图1)需要切非规则四角(见图1A向图)原是用手工剪出,剪切质量较差,也难以保证所需的形状,生产效率极低。后来,我们设计了这套切四角模,投产后,,切出的四角质量好,形状规矩,效率高。 Washing machine console parts, (Figure 1) need to cut irregular corners (see Figure 1A to the diagram) was originally cut by hand, the cutting quality is poor, it is difficult to ensure the desired shape, the production efficiency is very low. Later, we designed this set of four-corner mold, put into operation, cut out the four corners of good quality, shape rules, high efficiency.