当要加工的蜗杆模数较大,法向截形为直线形且为多头的蜗杆时,通常采用铣削法较好些。这里介绍三种使用万能铣头铣削蜗杆的方法。一、转动工作台铣蜗杆1.铣刀的选择要根据蜗杆的截面形状,如果蜗杆轴向截面内的齿形是直线,那么它的法向齿形就不是直线,需专门设计制造成形铣刀;如果法向截 When the worm to be processed a larger modulus, the normal truncation of linear and long for the worm, the milling method is usually better. Here are three ways to mill a worm using a universal milling head. First, turn the table mill worm 1 milling cutter choice according to the worm cross-sectional shape, if the worm axial cross-section of the profile is a straight line, then its normal profile is not a straight line, to be specifically designed and manufactured forming cutter If the normal cut