下面介绍的是镍质合金作电极所制的电极器的一般制法。一、钟罩形电解槽——用棉线蘸汽油或酒精绲烧破底药瓶的截部,烧后置冷水中骤冷,即自截部割裂为二。用镊子稍事修整,便成一电解槽。二、带有漆包线的电极——取厚度约为0.1厘米的镍幣两枚,成长1.5厘米,宽1厘米的镍合金片两个,用氯化锌和盐酸溶液作銲液,以红热的烙铁蘸焊锡分别与长约30厘 The following is a general production method of an electrode device made of an electrode made of a nickel alloy. First, the bell-shaped electrolyzer - the use of cotton, gasoline or alcohol to burn the bottom of the broken bottle, burning cold water after quenching, that is cut from the cut into two parts. With a bit of trimming, it becomes an electrolytic cell. Second, the electrode with enameled wire - take two nickel coins about 0.1 centimeters in thickness, grow 1.5 centimeters in width, 1 centimeter in nickel alloy piece two, use zinc chloride and hydrochloric acid solution as welding solution, with red hot Soldering iron, solder and about 30 PCT respectively