该车特别适于运送长大货物。轴载为21.3吨时,车辆最大载荷为50吨。在车辆装到载荷极限前,必须试验一下在规定线路上以相应的最大轴载运送时是否适宜。 该车目前仍装用滑动轴承。牵引装置不贯通,在车辆一端设有带手制动机的制动台。未设空气制动机。车底架由四根用横梁相联的纵梁组成。在纵梁的上翼横向装有厚20毫米的盖板。 The car is particularly suitable for transporting long goods. When the axle load is 21.3 tons, the maximum load of the vehicle is 50 tons. Before the vehicle is loaded to the load limit, it must be tested whether it is appropriate to deliver it at the appropriate maximum axle load on the specified line. The car is still equipped with sliding bearings. Traction device does not run through, at the end of the vehicle with a hand brake brake pad. No air brake. The chassis consists of four longitudinal beams connected by beams. A 20 mm thick cover is placed transversely to the upper wing of the stringer.