1.机床的结构:我们是用一部旧式的6呎皮带车床改装的。首先拆掉车床的床头,然后在床身上垫两块用废钢板焊制的箱形垫铁,再把车头装在垫铁上(车头掉向),并用螺栓固紧。车床主轴上装有大花盘。刀架装在另外的破旧小车床床面上,它同样可以作纵向和横向移动;刀架的位置要根据工件的大小确定。 2.操作方法:工作时,由传动皮带带动车头主轴旋转,装在花盘上的工件也跟 1. Structure of the machine: We converted it with an old 6-foot belt lathe. First remove the head of the lathe, and then in the bed padded with two scrap steel plate horn, and then the front mounted on the horn (head fell), and bolted. Lathe spindle equipped with a large disk. The turret is mounted on another shabby bed, which can also move longitudinally and laterally. The position of the turret is determined by the size of the workpiece. 2. Method of operation: work, driven by the drive belt head spindle rotation, mounted on the faceplate with the workpiece