接装机是专用于滤嘴香烟过滤嘴接装的设备。从卷烟机来的烟条高速进入接装机捕烟轮凹槽,并开始随捕烟轮的自转作圆周运动,在捕烟轮凹槽的底部上设计了负压气孔,用负气压对烟支采用制动,使烟支被轻缓地减速,并停在距定位块10～15mm处。检测原理图1是捕烟轮烟条制动负压系统示意 Pick-up machine is dedicated to filter cigarette filter tipping equipment. The cigarette rod coming from the cigarette machine goes into the groove of the soot catcher at a high speed and begins to move circularly with the rotation of the soot wheel. A negative pressure air hole is designed on the bottom of the groove of the smoke wheel. Using brake, the cigarette branch is gently slowed down and stopped at 10 ~ 15mm away from the positioning block. Detection principle Figure 1 is a smoking cigarette smoke brake system diagram