Hazelett带材铸造法美国Hazelett带材铸造公司讨论了在可动挠性钢带之间进行连续铸造的问题。图6是这种方法的示意图。由图可见,两根平行移动的、张紧地绕在轮子上的环形钢带构成了皮带输送机般的模壁。熔融金属由中间包注入到这两条钢带之间。串结在一条环形带上的许多金属块夹在钢带之间,组成可动的铸模侧壁。对于1016毫米宽的铸机来说,每分钟约有4 000克的金属块以很高的匀速在 Hazelett Tape Casting The United States Hazelett Tape Casting Company discussed the issue of continuous casting between movable flexible strips. Figure 6 is a schematic illustration of this method. As can be seen from the figure, two parallel moving, endless steel belts wound on wheels form a belt conveyor like mold wall. Molten metal is injected into the tundish between the two strips. A number of metal blocks that are connected to an endless belt are sandwiched between the steel strips to form a movable mold side wall. For a 1016 mm wide caster, about 4 000 g of metal block per minute are applied at very high uniform speeds