我厂原有汽车型极板分片机是采用20吨冲床改制成的(见图1)。上料形式为顶出落下装置,极板落在台面上时冲击大,造成活性物质脱落,致使废品率高,并且粉尘飞扬,严重危害操作工人身体健康。为提高产品质量,改善劳动条件,在不到一年时间内制成一台新分片机,目前已投入生产,性能较为满意(见图2)。 I plant the original car-plate machine is the use of 20-ton punch into a system (see Figure 1). Feeding the form of the top drop device, the impact plate when falling on the table, causing the active substance off, resulting in high rejection rate, and the dust flying, seriously endangering the health of workers. In order to improve product quality and improve working conditions, a new slicer was completed in less than a year and has been put into production now, with satisfactory performance (see Figure 2).