论文部分内容阅读
以甲基丙烯酸缩水甘油酯(GMA)为原料合成了2,3-环碳酸甘油酯甲基丙烯酸酯(PCMA),并通过FTIR、1HNMR、元素分析等方法对环碳酸酯进行了表征。详细讨论了催化剂的种类、反应温度、反应压力、反应时间对收率的影响。结果表明,以质量分数0.5%的四丁基氯化铵(TBAC)(以单体质量计,以下同)和质量分数0.5%的四丁基溴化铵(TBAB)(以单体质量计,以下同)为共催化剂,质量分数为0.5%的特丁基对苯二酚(TBHQ)(以单体质量计,以下同)为阻聚剂,当温度为85℃,二氧化碳压力为1.2 MPa,反应15 h时,产物收率达到63.3%。
Cyclic carbonate was characterized by FTIR, 1HNMR and elemental analysis. Glycidyl methacrylate (PCMA) was synthesized from glycidyl methacrylate (GMA). The effects of catalyst type, reaction temperature, reaction pressure and reaction time on the yield were discussed in detail. The results showed that TBAB (0.5% by mass), tetrabutylammonium bromide (TBAB) by mass (as monomer mass, hereinafter the same) and 0.5% The same below) as a co-catalyst, TBHQ 0.5% (by mass, hereinafter the same) as a polymerization inhibitor, when the temperature is 85 ° C, the pressure of carbon dioxide is 1.2 MPa, After 15 h of reaction, the product yield reached 63.3%.