以甲基苯基环硅氧烷和甲基乙烯基环四硅氧烷为原料,二乙烯基四甲基二硅氧烷为封端剂,在四甲基氢氧化铵催化下,采用阴离子开环聚合法,制得多乙烯基苯基硅油。考察封端剂用量、催化剂用量、反应温度和时间对聚合物黏度、折光率和转化率的影响,用作硅橡胶交联剂时,乙烯基含量对硅橡胶耐热氧化性及力学性能的影响;结果表明:封端剂用量2%、催化剂用量1.25%时,100℃下反应4h制得的多乙烯基苯基乙烯硅油具有黏度低、折光率高、耐热性好等特点,与含氢硅油固化后的力学性能更好,可以满足LED封装的不同设计要求。 Using methylphenylcyclosiloxane and methylvinylcyclotetrasiloxane as raw materials, divinyltetramethyldisiloxane as end-capping agent, under the catalysis of tetramethylammonium hydroxide, anion-opening Central polymerization method, the system of polyvinyl phenyl silicone oil. The effects of the amount of end-capping agent, the amount of catalyst, reaction temperature and time on the viscosity, refractive index and conversion of the polymer were investigated. The effect of vinyl content on the thermal oxidation resistance and mechanical properties of silicone rubber The results showed that the poly vinyl phenyl vinyl silicone oil prepared by reacting at 100 ℃ for 4h with the amount of capping agent of 2% and the amount of catalyst of 1.25% has the characteristics of low viscosity, high refractive index and good heat resistance, After curing silicone oil better mechanical properties, LED packaging to meet the different design requirements.