论文部分内容阅读
照片所示机床是苏联明斯克自动线工厂生产的,供加工平台、压板、控制板式的平板工件用,无需采用钻模装置。在这台机床上能完成钻孔、扩孔、铰孔、锪孔和攻丝。十字形座标工作台沿静压导轨移动。该机床设有三座标数控系统(明斯克自动线专业设计局的装置),能保证分辨率为0.1毫米和运动部件的定位精度为±0.05毫米。采用金属切削机床实验研究所的КП3—И型编码器作为反馈装置。
The machine shown in the picture is produced by the Minsk automatic line factory in the Soviet Union, which is used for flat workpieces of processing platform, pressing plate and control plate. It is unnecessary to adopt the drilling device. Drilling, reaming, reaming, countersinking and tapping can be done on this machine. Cross-shaped coordinate table along the static pressure rail movement. The machine is equipped with a three-coordinate CNC system (Minsk Automatic Line Professional Design Bureau) with a resolution of 0.1 mm and a moving part of ± 0.05 mm. Using metal cutting machine tool experimental Institute of КП3-И type encoder as a feedback device.