CdTe量子点掺杂玻璃的制备及其非线性光学性能

来源 :中国激光 | 被引量 : 0次 | 上传用户:jql
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
采用高温热熔融法制备了CdTe量子点掺杂的硅酸盐玻璃, 测试了其拉曼、吸收和发射光谱, 验证了量子点掺杂玻璃的量子尺寸效应。在飞秒激光(800 nm和960 nm)激发下, CdTe量子点掺杂玻璃产生了上转换荧光, 证明了其为双光子吸收诱导发光, 发现双光子荧光对激发波长有一定的范围要求, 测得CdTe量子点掺杂玻璃的非线性吸收系数可达3.62×10-11 m/W。
其他文献
简述了内腔倍频532nm环形激光器的原理。根据实验要求,采用Nd:YVO4和KTP作为激光晶体和倍频晶体,设计了可调谐的环形腔倍频激光器。实验结果表明,所设计的激光器最大可输出2mW的单纵模绿光,绿光可调谐范围20GHz,满足设计要求。
阐述了光电混频技术的基本原理。基于独立光电器件和组合光电器件两种实现途径,追踪并归纳了光电混频技术的研究进展。受微波光子变频技术的启发,提出了一种基于体型电光调制器的光电混频方法。该方法使用电光调制器在光场进行混频解调,后端采用高分辨率、低成本的图像传感器,突破了阵列尺寸对图像分辨率的限制,具有高能量利用率、高信噪比的优势。
现在,10.6 μm CO2激光辐射的高频高灵敏度探测一般用液氮冷却的HgCdTe量子探测器来完成。这种探测器世界上每个先进的实验室都可以制造。虽然液氮需要使用真空杜瓦瓶密封,从而增加了装置的尺寸、造价和辅助设备,但这种冷却对探测器来说是必不可少的,因为在室温时,探测器在10.6 μm的灵敏度下降到零。这是由于室温下普通HgCdTe器件的吸收减少、载流子寿命变短,而本征载流子浓度急剧增加的缘故。
期刊
本文报道我们研究设计的实时、平行处理像的光学奇异滤波器(Optical Novelty Filter)的原理与结构,以检测透明介质中的微粒为例,分析了影响处理结果的各种因素。利用这一滤波器可以检测出15μm以上尺寸的微粒,检测的重复性可达98.6%。
期刊
A simple approach to calculate the amplitude component of a wave front propagating in space from a hologram is proposed. It is able to calculate the amplitude distribution on a plane at any distance rapidly using a standard GPU. This is useful for analyzi
A hundred-watt-level spatial mode switchable all-fiber laser is demonstrated based on a master oscillator power amplifier scheme. The performance of the amplifier with two seed lasers, i.e., with the acoustically induced fiber grating (AIFG) mode converte
A novel nonlinear optical loop mirror (NOLM) with a nonreciprocal phase shift bias (NPSB), called power equalization NOLM (PE-NOLM), is proposed for reducing the power fluctuation of pulse trains. NPSB provides part of the nonreciprocal phase difference s
A low-threshold Raman effect in a kilowatt ytterbium-doped narrowband fiber amplifier system is reported. The Raman Stokes light at 1120 nm is achieved with the total output power of only
期刊
期刊